Welcome to our website!

Product Catalog

Rapid Product Index

Recommended Products

Friend Links

  • 3,5-Dinitro Toluamide  148-01-6
Name:3,5-Dinitro Toluamide 148-01-6
CAS No:148-01-6

PRODUCT DESCRIPTION

3,5-Dinitro Toluamide

CAS No.: 148-01-6
Synonyms:
  • 2-methyl-3,5-dinitrobenzamide;
  • Benzamide, 2-methyl-3,5-dinitro-;
  • 2-Methyl-3,5-dinitrobenzamide;
  • 2-Methyl-3,5-dinitrobenzamide,3,5-Dinitro-o-toluamide;
  • Dinitolmide;
Formula: C8H7N3O5
Exact Mass: 225.03900
Molecular Weight: 225.15800
PSA: 134.73000
LogP: 2.65700
DescriptionFeedback
Dinitolmide (or zoalene) is a fodder additive for poultry, used to prevent coccidiosis infections. It is sold under trade names such as Coccidine A, Coccidot, and Zoamix.
Dinitolmide is usually added to feed in doses of 125ppm (preventive) or 250ppm (curative). It is a broad-spectrum anticoccidial drug, preventing seven main strains of Eimeria coccidium. It leaves no residues in tissues. It can be also used to prevent coccidiosis of domestic rabbits.

PropertiesFeedback
Appearance & Physical State: Yellowish, crystalline solid
Density: 1.52 g/cm3
Melting Point: 177-181ºC
Boiling Point: 298ºC at 760 mmHg
Flash Point: 134ºC
Refractive Index: 1.636
Storage Condition: 0-6ºC
Vapor Pressure: 0.00131mmHg at 25°C

Safety InfoFeedback
RTECS: XS4200000
Safety Statements: S26-S36-S16
HS Code: 2309901000
WGK Germany: 3
RIDADR: UN 1648 3/PG 2
Risk Statements: R22; R36; R20/21/22; R11
Hazard Codes: Xn; F

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 19, 2017

Revision Date: Aug 19, 2017

1.Identification

1.1GHS Product identifier

Product name 3,5-Dinitro Toluamide

1.2Other means of identification

Product number -
Other names 2-methyl-3,5-dinitrobenzamide

1.3Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4Supplier's details

Company XiXisys.com
Address XiXisys.com
Telephone XiXisys.com
Fax XiXisys.com

1.5Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

2.Hazard identification

2.1Classification of the substance or mixture

Acute toxicity - Oral, Category 4

2.2GHS label elements, including precautionary statements

Pictogram(s)
Signal word

Warning

Hazard statement(s)

H302 Harmful if swallowed

Precautionary statement(s)
Prevention

P264 Wash ... thoroughly after handling.

P270 Do not eat, drink or smoke when using this product.

Response

P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor/…if you feel unwell.

P330 Rinse mouth.

Storage

none

Disposal

P501 Dispose of contents/container to ...

2.3Other hazards which do not result in classification

none

3.Composition/information on ingredients

3.1Substances

Chemical name Common names and synonyms CAS number EC number Concentration
3,5-Dinitro Toluamide 3,5-Dinitro Toluamide 148-01-6 none 100%

4.First-aid measures

4.1Description of necessary first-aid measures

General advice

Consult a physician. Show this safety data sheet to the doctor in attendance.

If inhaled

Fresh air, rest.

In case of skin contact

Rinse and then wash skin with water and soap.

In case of eye contact

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

If swallowed

Rinse mouth.

4.2Most important symptoms/effects, acute and delayed

Exposure Routes: inhalation, ingestion, skin and/or eye contact Symptoms: Contact eczema Target Organs: Skin, liver, blood (NIOSH, 2016)

4.3Indication of immediate medical attention and special treatment needed, if necessary

Basic treatment: Establish a patent airway. Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if needed. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Monitor for pulmonary edema and treat if necessary ... . Monitor for shock and treat if necessary ... . Anticipate seizures and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with normal saline during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 ml/kg up to 200 ml of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool ... . Cover skin burns with dry sterile dressings after decontamination ... . /Poison A and B/

5.Fire-fighting measures

5.1Extinguishing media

Suitable extinguishing media

In case of fire in the surroundings, use appropriate extinguishing media.

5.2Specific hazards arising from the chemical

no data available

5.3Special protective actions for fire-fighters

Wear self-contained breathing apparatus for firefighting if necessary.

6.Accidental release measures

6.1Personal precautions, protective equipment and emergency procedures

Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. For personal protection see section 8.

6.2Environmental precautions

Personal protection: particulate filter respirator adapted to the airborne concentration of the substance. Sweep spilled substance into covered containers. If appropriate, moisten first to prevent dusting.

6.3Methods and materials for containment and cleaning up

Pick up and arrange disposal. Sweep up and shovel. Keep in suitable, closed containers for disposal.

7.Handling and storage

7.1Precautions for safe handling

Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Avoid exposure - obtain special instructions before use.Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2.

7.2Conditions for safe storage, including any incompatibilities

Store in cool place. Keep container tightly closed in a dry and well-ventilated place.

8.Exposure controls/personal protection

8.1Control parameters

Occupational Exposure limit values

Recommended Exposure Limit: 10 Hr Time-Weighted Avg: 5 mg/cu m

Biological limit values

no data available

8.2Appropriate engineering controls

Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

8.3Individual protection measures, such as personal protective equipment (PPE)

Eye/face protection

Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection

Wear impervious clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.

Respiratory protection

Wear dust mask when handling large quantities.

Thermal hazards

no data available

9.Physical and chemical properties

Physical state Yellowish, crystalline solid
Colour Crystals from dilute alcohol
Odour no data available
Melting point/ freezing point 177-181ºC
Boiling point or initial boiling point and boiling range 298ºC at 760 mmHg
Flammability Noncombustible SolidNot combustible.
Lower and upper explosion limit / flammability limit no data available
Flash point 134ºC
Auto-ignition temperature no data available
Decomposition temperature no data available
pH no data available
Kinematic viscosity no data available
Solubility Slight (NIOSH, 2016)
Partition coefficient n-octanol/water (log value) no data available
Vapour pressure 0.00131mmHg at 25°C
Density and/or relative density 1.52 g/cm3
Relative vapour density no data available
Particle characteristics no data available

10.Stability and reactivity

10.1Reactivity

no data available

10.2Chemical stability

Stable under recommended storage conditions.

10.3Possibility of hazardous reactions

DINITOLMIDE reacts as an oxidizing agent. Has been known on at least one occasion to explode destructively. Incompatible with easily oxidized materials. Emits toxic NOx fumes if heated to decomposition.

10.4Conditions to avoid

no data available

10.5Incompatible materials

None reported

10.6Hazardous decomposition products

no data available

11.Toxicological information

Acute toxicity

  • Oral: LD50 Rat oral 600 mg/kg
  • Inhalation: no data available
  • Dermal: no data available

Skin corrosion/irritation

no data available

Serious eye damage/irritation

no data available

Respiratory or skin sensitization

no data available

Germ cell mutagenicity

no data available

Carcinogenicity

A4; Not classifiable as a human carcinogen.

Reproductive toxicity

no data available

STOT-single exposure

no data available

STOT-repeated exposure

no data available

Aspiration hazard

no data available

12.Ecological information

12.1Toxicity

  • Toxicity to fish: no data available
  • Toxicity to daphnia and other aquatic invertebrates: EC50 Daphnia magna (Water flea; intoxication, immobilization) 155 mg/L/48 hr (95% confidence interval: 146-164 mg/L); static
  • Toxicity to algae: no data available
  • Toxicity to microorganisms: no data available

12.2Persistence and degradability

no data available

12.3Bioaccumulative potential

no data available

12.4Mobility in soil

no data available

12.5Other adverse effects

no data available

13.Disposal considerations

13.1Disposal methods

Product

The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.

Contaminated packaging

Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.

14.Transport information

14.1UN Number

ADR/RID: UN1648 IMDG: UN1648 IATA: UN1648

14.2UN Proper Shipping Name

ADR/RID: ACETONITRILE
IMDG: ACETONITRILE
IATA: ACETONITRILE

14.3Transport hazard class(es)

ADR/RID: 3 IMDG: 3 IATA: 3

14.4Packing group, if applicable

ADR/RID: II IMDG: II IATA: II

14.5Environmental hazards

ADR/RID: no IMDG: no IATA: no

14.6Special precautions for user

no data available

14.7Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code

no data available

15.Regulatory information

15.1Safety, health and environmental regulations specific for the product in question

Chemical name Common names and synonyms CAS number EC number
3,5-Dinitro Toluamide 3,5-Dinitro Toluamide 148-01-6 none
European Inventory of Existing Commercial Chemical Substances (EINECS) Listed.
EC Inventory Listed.
United States Toxic Substances Control Act (TSCA) Inventory Not Listed.
China Catalog of Hazardous chemicals 2015 Not Listed.
New Zealand Inventory of Chemicals (NZIoC) Listed.
Philippines Inventory of Chemicals and Chemical Substances (PICCS) Not Listed.
Vietnam National Chemical Inventory Not Listed.
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC) Not Listed.

RELATED PRODUCTS