Welcome to our website!

Product Catalog

Rapid Product Index

Recommended Products

Friend Links

  • Methyl 4-(bromomethyl)benzoate  2417-72-3
Name:Methyl 4-(bromomethyl)benzoate 2417-72-3
CAS No:2417-72-3

PRODUCT DESCRIPTION

Methyl 4-(bromomethyl)benzoate

CAS No.: 2417-72-3
Synonyms:
  • α-Bromo-p-toluic Acid Methyl Ester;
  • 4-(Bromomethyl)benzoic Acid Methyl Ester;
  • Methyl α-Bromo-p-toluate;
  • 4-Bromomethylbenzoic acid methyl ester;
  • 4-methoxycarbonylbenzyl bromide;
  • Methyl 4-bromomethylbenzoate;
Formula: C9H9BrO2
Exact Mass: 227.97900
Molecular Weight: 229.07100
PSA: 26.30000
LogP: 2.36810
DescriptionFeedback
4-(Bromomethyl)benzoic Acid Methyl Ester is an ester derivative of a bromoalkylated benzoic acid. 4-(Bromomethyl)benzoic Acid Methyl Ester is used in the preparation of potential anti-HIV agents. It is also used as a catalyst for rearrangement of benzylthiothiazoline derivatives in the preparation aldose reductase inhibitors.

PropertiesFeedback
Appearance & Physical State: powder chunks
Density: 1.47 g/cm3
Melting Point: 53-58ºC
Boiling Point: 130-135ºC (2 mmHg)
Flash Point: 130-135°C/2mm
Refractive Index: 1.559
Vapor Pressure: 0.00063mmHg at 25°C

Safety InfoFeedback
Hazard Class: 8
Safety Statements: S25-S36/37/39-S45
HS Code: 2916399090
Packing Group: III
WGK Germany: 3
RIDADR: UN 3261
Risk Statements: R34
Hazard Codes: C

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 11, 2017

Revision Date: Aug 11, 2017

1.Identification

1.1GHS Product identifier

Product name Methyl 4-(bromomethyl)benzoate

1.2Other means of identification

Product number -
Other names α-Bromo-p-toluic Acid Methyl Ester

1.3Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4Supplier's details


Fax

1.5Emergency phone number

Emergency phone number
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

2.Hazard identification

2.1Classification of the substance or mixture

Acute toxicity - Oral, Category 3

Skin corrosion, Category 1B

Respiratory sensitization, Category 1

2.2GHS label elements, including precautionary statements

Pictogram(s)   
Signal word

Danger

Hazard statement(s)

H301 Toxic if swallowed

H314 Causes severe skin burns and eye damage

H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled

Precautionary statement(s)
Prevention

P264 Wash ... thoroughly after handling.

P270 Do not eat, drink or smoke when using this product.

P260 Do not breathe dust/fume/gas/mist/vapours/spray.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.

P284 [In case of inadequate ventilation] wear respiratory protection.

Response

P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor/…

P321 Specific treatment (see ... on this label).

P330 Rinse mouth.

P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.

P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].

P363 Wash contaminated clothing before reuse.

P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P310 Immediately call a POISON CENTER/doctor/…

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P342+P311 If experiencing respiratory symptoms: Call a POISON CENTER/doctor/...

Storage

P405 Store locked up.

Disposal

P501 Dispose of contents/container to ...

2.3Other hazards which do not result in classification

none

3.Composition/information on ingredients

3.1Substances

Chemical name Common names and synonyms CAS number EC number Concentration
Methyl 4-(bromomethyl)benzoate Methyl 4-(bromomethyl)benzoate 2417-72-3 none 100%

4.First-aid measures

4.1Description of necessary first-aid measures

General advice

Consult a physician. Show this safety data sheet to the doctor in attendance.

If inhaled

If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.

In case of skin contact

Wash off with soap and plenty of water. Consult a physician.

In case of eye contact

Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.

If swallowed

Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

4.2Most important symptoms/effects, acute and delayed

no data available

4.3Indication of immediate medical attention and special treatment needed, if necessary

no data available

5.Fire-fighting measures

5.1Extinguishing media

Suitable extinguishing media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

5.2Specific hazards arising from the chemical

no data available

5.3Special protective actions for fire-fighters

Wear self-contained breathing apparatus for firefighting if necessary.

6.Accidental release measures

6.1Personal precautions, protective equipment and emergency procedures

Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. For personal protection see section 8.

6.2Environmental precautions

Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.

6.3Methods and materials for containment and cleaning up

Pick up and arrange disposal. Sweep up and shovel. Keep in suitable, closed containers for disposal.

7.Handling and storage

7.1Precautions for safe handling

Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Avoid exposure - obtain special instructions before use.Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2.

7.2Conditions for safe storage, including any incompatibilities

Store in cool place. Keep container tightly closed in a dry and well-ventilated place.

8.Exposure controls/personal protection

8.1Control parameters

Occupational Exposure limit values

no data available

Biological limit values

no data available

8.2Appropriate engineering controls

Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

8.3Individual protection measures, such as personal protective equipment (PPE)

Eye/face protection

Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection

Wear impervious clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.

Respiratory protection

Wear dust mask when handling large quantities.

Thermal hazards

no data available

9.Physical and chemical properties

Physical state powder chunks
Colour no data available
Odour no data available
Melting point/ freezing point 235°C(dec.)(lit.)
Boiling point or initial boiling point and boiling range 108°C/0.04mmHg(lit.)
Flammability no data available
Lower and upper explosion limit / flammability limit no data available
Flash point 52°C(lit.)
Auto-ignition temperature no data available
Decomposition temperature no data available
pH no data available
Kinematic viscosity no data available
Solubility no data available
Partition coefficient n-octanol/water (log value) no data available
Vapour pressure 0.00063mmHg at 25°C
Density and/or relative density 1.47 g/cm3
Relative vapour density no data available
Particle characteristics no data available

10.Stability and reactivity

10.1Reactivity

no data available

10.2Chemical stability

Stable under recommended storage conditions.

10.3Possibility of hazardous reactions

no data available

10.4Conditions to avoid

no data available

10.5Incompatible materials

no data available

10.6Hazardous decomposition products

no data available

11.Toxicological information

Acute toxicity

  • Oral: no data available
  • Inhalation: no data available
  • Dermal: no data available

Skin corrosion/irritation

no data available

Serious eye damage/irritation

no data available

Respiratory or skin sensitization

no data available

Germ cell mutagenicity

no data available

Carcinogenicity

no data available

Reproductive toxicity

no data available

STOT-single exposure

no data available

STOT-repeated exposure

no data available

Aspiration hazard

no data available

12.Ecological information

12.1Toxicity

  • Toxicity to fish: no data available
  • Toxicity to daphnia and other aquatic invertebrates: no data available
  • Toxicity to algae: no data available
  • Toxicity to microorganisms: no data available

12.2Persistence and degradability

no data available

12.3Bioaccumulative potential

no data available

12.4Mobility in soil

no data available

12.5Other adverse effects

no data available

13.Disposal considerations

13.1Disposal methods

Product

The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.

Contaminated packaging

Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.

14.Transport information

14.1UN Number

ADR/RID: UN3261 IMDG: UN3261 IATA: UN3261

14.2UN Proper Shipping Name

ADR/RID: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
IMDG: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
IATA: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.

14.3Transport hazard class(es)

ADR/RID: 8 IMDG: 8 IATA: 8

14.4Packing group, if applicable

ADR/RID: III IMDG: III IATA: III

14.5Environmental hazards

ADR/RID: no IMDG: no IATA: no

14.6Special precautions for user

no data available

14.7Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code

no data available

15.Regulatory information

15.1Safety, health and environmental regulations specific for the product in question

Chemical name Common names and synonyms CAS number EC number
Methyl 4-(bromomethyl)benzoate Methyl 4-(bromomethyl)benzoate 2417-72-3 none
European Inventory of Existing Commercial Chemical Substances (EINECS) Not Listed.
EC Inventory Not Listed.
United States Toxic Substances Control Act (TSCA) Inventory Not Listed.
China Catalog of Hazardous chemicals 2015 Not Listed.
New Zealand Inventory of Chemicals (NZIoC) Listed.
Philippines Inventory of Chemicals and Chemical Substances (PICCS) Not Listed.
Vietnam National Chemical Inventory Not Listed.
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC) Not Listed.

RELATED PRODUCTS